Insulation and air sealing planned around your heating and cooling system, so equipment works less and lasts longer.
Heating and cooling equipment is sized to the home it serves. When the house loses less heat and gains less in summer, the load drops, and the system runs shorter cycles, wears less and keeps rooms steadier. That is why insulation and air sealing belong in any plan for new equipment.
We work with homeowners and HVAC providers to sequence the work: seal and insulate first, then size the equipment to the improved house. It can prevent the common mistake of buying an oversized system for a leaky home.
A new system sized to a leaky house will be larger than the improved house needs. Doing the envelope first can allow a smaller, better-matched system.
Rooms over garages, bonus rooms and long duct runs often cause comfort issues. We locate the root causes and address them in the building, not only in the equipment.
Equipment in a hot attic or damp crawl space works harder. Sealing, insulating and sometimes moving the space into the conditioned envelope helps.
We share test results and photos so your provider can size equipment with real information. A good partnership leads to a better outcome.
Drag the handle to compare.
BeforeAfterInsulation first, equipment sized after.
Problem rooms identified.
Sealing, insulating or relocating.
Test results for your HVAC provider.
Equipment spaces improved.
Shorter cycles and less wear.
Every topic has its own page with what to expect and how we approach it.
Project situationHot and Cold RoomsOne room is always too warm and another is always too cold. Here is why it happens and…Learn more 
Project situationHigh Energy BillsWhen bills climb and the house still does not feel right, the building is often the reason. Here…Learn more 
Project situationAdditions and Bonus RoomsNew rooms need to feel like the rest of the house. Here is what makes additions comfortable and…Learn more Answer a few questions about your rooms, bills and spaces and see which fixes to look at first.
You tell us what is going on, which rooms bother you and what you hope to change, and we set a time that fits your day.
We walk the attic, walls, crawl space and equipment, measure depths and use thermal imaging when it helps.
We protect the house, seal air leaks, place baffles and fix small problems so the insulation can do its job.
Loose-fill, batts, foam or board goes in to the planned depth, with clean edges and clear markers.
We measure the result, take photos and test air leakage when the scope includes it.
We walk the finished work with you, answer questions and leave the site clean.
Usually after, so the new equipment is sized for the improved house. If your system has failed, we can still help sequence the work.
It reduces run time and cycling, which can reduce wear. We cannot promise a specific lifespan.
We focus on insulation and air sealing and coordinate with HVAC professionals on equipment.
It often helps, along with air sealing and duct work. We identify the main cause for each room.
A proper load calculation is a smart step when replacing equipment, and our test data can support it.
Duct Sealing and InsulationLeaky, uninsulated ducts in attics and crawl spaces repaired and wrapped, so the air you pay to condition…Explore 
Home Energy AuditsA whole-house assessment that finds where your home loses comfort and energy and ranks the fixes in the…Explore 
Unvented Attic Spray FoamSpray foam on the underside of the roof deck, turning the attic into a conditioned space that protects…Explore 
Blower Door and Thermal ImagingA fan test and a thermal camera that show exactly where air and heat escape, so repairs go…Explore Tell us about the project and we will call you back to talk it through.
Or call (615) 357-7797 to talk now.
